MD150T indicator is designed to work with a strain gauge force sensors, allowing the measurements with a resolution of up to 0.001% *. The result can be scaled to any unit of force or mass. MD150T is equipped with a USB as well as RS485 Modbus RTU protocol to communicate with the industrial devices such as flat panel HMI or PLC.
| Power Supply | 12 ... 36 VDC, 250 mA |
| Sensor input |
Power Supply: 5 V Max. differential voltage: ± 39 mV Resolution: 0.001% F.S. Temperature error: 0.0025% F.S./°C Meas. frequency: 10 Hz, 80 Hz |
| Zeroing input (TARA) |
Low level: 0 ... 2 V High level: 5 ... 24 V Minimal pulse length: 10 ms Minimal pause between pulses: 500 ms |
| Relay outputs PK1, PK2 | Max. 1A/125 VAC alebo 2A/30 VDC |
| Analog output |
Range: 0 ... 10 V Resolution: 2,5 mV Max. load: 20 mA Total error: 0.2% F.S. |
| PC communication |
RS485: 38400 Bd, 8, n, 1 USB: 1.1, 2.0 |
| Temperature range | 0 ... 50 °C |
| Display | 6-digits, height 13.5 mm |
| Dimension | 45 x 92 x81 mm (height x wifth x length) |
| Weight | 200 g |
| Protection | IP40, front panel head - IP65 |